Hyperaktive’s Dual Axis Accelerometer is used to measure acceleration and lateral G-forces. An accelerometer is critical to ensuring you are getting every last bit of performance out of your combination. Being able to see small hesitations, interruptions, or dips in acceleration G’s will allow you to pinpoint that section of your calibration and make improvements to gain performance.
+/- 5 G range
Sensor should be mounted as near the center of gravity of the vehicle as possible for proper readings.
The unit must be mounted with the label facing up and the arrow pointing toward the front of the vehicle.
The unit can be secured with the 6/32 Mounting holes on the bottom of the unit, or velcro is an option if the car vibrates excessively.
Proudly made in the USA and housed in a strong billet aluminum housing with LED Status indicator.
Scaling and Wiring Information
Wiring Information:
Red= 12v+
Black= Ground
Yellow= Lateral G Output
Blue= Accel G Output
Scaling Values:
1.25V = -5G
1.5V = -4G
1.75V = -3G
2.0V = -2G
2.25V = -1G
2.5V = 0G
2.75V = 1G
3.0V = 2G
3.25V = 3G
3.5V = 4G
3.75V = 5G